PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy
TP4 Pilot Pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy
- Flush-head for sheet thickness of 1.00 mm and greater.
- Satisfies a wide range of positioning, pivot, and alignment applications.
- Chamfered end makes mating hole location easy.
- Type TP4 recommended for use in stainless steel sheets HRB (Rockwell "B" Scale) 92 or less and HB (Hardness Brinell) 195 or less.
Item # |
Item Name |
Hole Size in Sheet + 0.08 |
P - Nominal Pin Diameter ± 0.05 |
L - Length ± 0.4 |
D ± 0.15 |
H ± 0.4 |
Fastener Material |
Standard Finish |
Inventory |
---|---|---|---|---|---|---|---|---|---|
TP4-3mm-8 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 3.5 mm | N/A 3.00 mm | N/A 8 mm | N/A 2.11 mm | N/A 5.20 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-4mm-8 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 4.5 mm | N/A 4.00 mm | N/A 8 mm | N/A 2.82 mm | N/A 6.12 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-3mm-10 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 3.5 mm | N/A 3.00 mm | N/A 10 mm | N/A 2.11 mm | N/A 5.20 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-4mm-10 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 4.5 mm | N/A 4.00 mm | N/A 10 mm | N/A 2.82 mm | N/A 6.12 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-5mm-10 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 5.5 mm | N/A 5.00 mm | N/A 10 mm | N/A 3.53 mm | N/A 7.19 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-3mm-12 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 3.5 mm | N/A 3.00 mm | N/A 12 mm | N/A 2.11 mm | N/A 5.20 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-4mm-12 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 4.5 mm | N/A 4.00 mm | N/A 12 mm | N/A 2.82 mm | N/A 6.12 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-5mm-12 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 5.5 mm | N/A 5.00 mm | N/A 12 mm | N/A 3.53 mm | N/A 7.19 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-6mm-12 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 6.5 mm | N/A 6.00 mm | N/A 12 mm | N/A 4.24 mm | N/A 8.13 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-3mm-16 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 3.5 mm | N/A 3.00 mm | N/A 16 mm | N/A 2.11 mm | N/A 5.20 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-4mm-16 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 4.5 mm | N/A 4.00 mm | N/A 16 mm | N/A 2.82 mm | N/A 6.12 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-5mm-16 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 5.5 mm | N/A 5.00 mm | N/A 16 mm | N/A 3.53 mm | N/A 7.19 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-6mm-16 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 6.5 mm | N/A 6.00 mm | N/A 16 mm | N/A 4.24 mm | N/A 8.13 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-5mm-20 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 5.5 mm | N/A 5.00 mm | N/A 20 mm | N/A 3.53 mm | N/A 7.19 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
TP4-6mm-20 | N/A Self-Clinching Pilot Pins - Type TPS™, TP4™ - Metric | N/A 6.5 mm | N/A 6.00 mm | N/A 20 mm | N/A 4.24 mm | N/A 8.13 mm | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |