CONNECT WITH US

Products

Ultrasert III is a symmetrical insert designed for high volume production. The inserts can be loaded into an automatic feeding system without the need for special orientation. The inserts can be installed ultrasonically, with heat or can also be molded in place. The symmetrical design eliminates the time required for orientation which produces higher production and lower overall cost.

  • Symmetrical design for low cost, high volume production
  • No orientation required
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

MFG #

Inventory

List Price

Thread Size

A - Diameter ±.004

B - Length ±.004

C - Diameter ±.004

D - Hole Size +.003 -.000

Minimum Boss Diameter

6635-02BR157 N/A {0} {QUOTE} N/A #2-56 N/A .135 in N/A .157 in N/A .123 in N/A .128 in N/A .286 in
6635-04BR226 N/A {0} {QUOTE} N/A #4-40 N/A .179 in N/A .226 in N/A .154 in N/A .159 in N/A .372 in
6635-06BR281 N/A {0} {QUOTE} N/A #6-32 N/A .220 in N/A .281 in N/A .185 in N/A .190 in N/A .440 in
6635-2BR321 N/A {0} {QUOTE} N/A #8-32 N/A .250 in N/A .321 in N/A .218 in N/A .223 in N/A .498 in
6635-3BR375 N/A {0} {QUOTE} N/A #10-24 N/A .281 in N/A .375 in N/A .249 in N/A .254 in N/A .558 in
6641-3BR375 N/A {0} {QUOTE} N/A #10-32 N/A .281 in N/A .375 in N/A .249 in N/A .254 in N/A .558 in
6635-4BR500 N/A {0} {QUOTE} N/A 1/4-20 N/A .342 in N/A .500 in N/A .312 in N/A .317 in N/A .684 in
6641-4BR500 N/A {0} {QUOTE} N/A 1/4-28 N/A .342 in N/A .500 in N/A .312 in N/A .317 in N/A .684 in
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1