Ultrasert® I Unified Inserts On S.W. Anderson

The Ultrasert I insert is a fluted brass insert designed for ultra sonic or heat installation into thermoplastics. The tapered design allows for accurate positioning in the receiving hole ensuring proper alignment prior to installation. The vertical flutes provide resistance to rotation and the stepped inclined ribs are for tensile strength. The gradual external taper optimizes the flow of plastic as the insert/plastic interfaces, permitting a smooth and rapid installation.

Vertical flutes and horizontal fins provide superior assembly strength
Tapered design assures rapid and accurate alignment prior to installation
Flute and fin design provides a chip-free environment
The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

1 - 7 of 7 | Results Per Page | View | Unit of Measure

Request Information Compare Items Request Quote Add To Cart

MFG #	Inventory	List Price	Thread Size	A - Diameter ±.005	B - Diameter ±.005	L - Length ±.004	C - Diameter ±.001	D - Diameter ±.001

70815-04-250	N/A {0}	{QUOTE}	N/A #4-40	N/A .173 in	N/A .145 in	N/A .250 in	N/A .141 in	N/A .154 in
70815-06-312	N/A {0}	{QUOTE}	N/A #6-32	N/A .219 in	N/A .183 in	N/A .312 in	N/A .179 in	N/A .198 in
70815-2-375	N/A {0}	{QUOTE}	N/A #8-32	N/A .252 in	N/A .212 in	N/A .375 in	N/A .206 in	N/A .227 in
70815-3-438	N/A {0}	{QUOTE}	N/A #10-24	N/A .297 in	N/A .249 in	N/A .438 in	N/A .243 in	N/A .268 in
70811-3-438	N/A {0}	{QUOTE}	N/A #10-32	N/A .297 in	N/A .249 in	N/A .438 in	N/A .243 in	N/A .268 in
70815-4-562	N/A {0}	{QUOTE}	N/A 1/4-20	N/A .383 in	N/A .323 in	N/A .562 in	N/A .320 in	N/A .350 in
70811-4-562	N/A {0}	{QUOTE}	N/A 1/4-28	N/A .383 in	N/A .323 in	N/A .562 in	N/A .320 in	N/A .350 in

1 - 7 of 7 | Results Per Page | View | Unit of Measure