PROP 65 WARNINGCONNECT WITH US

Products

The Ultrasert I insert is a fluted brass insert designed for ultra sonic or heat installation into thermoplastics. The tapered design allows for accurate positioning in the receiving hole ensuring proper alignment prior to installation. The vertical flutes provide resistance to rotation and the stepped inclined ribs are for tensile strength. The gradual external taper optimizes the flow of plastic as the insert/plastic interfaces, permitting a smooth and rapid installation.

  • Vertical flutes and horizontal fins provide superior assembly strength
  • Tapered design assures rapid and accurate alignment prior to installation
  • Flute and fin design provides a chip-free environment
    The test data should be considered as average values for the general families of plastics indicated. Criti cal application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

MFG #

Inventory

List Price

Thread Size

A - Diameter ±0.13

B - Diameter ±0.13

L - Length ±0.10

C - Diameter ±0.03

D - Diameter ±0.03

70817-3-079 N/A {0} {QUOTE} N/A M3 x 0.5 N/A 5.51 mm N/A 4.65 mm N/A 7.92 mm N/A 4.55 mm N/A 5.03 mm
70817-3.5-079 N/A {0} {QUOTE} N/A M3.5 x 0.6 N/A 5.51 mm N/A 4.65 mm N/A 7.92 mm N/A 4.55 mm N/A 5.03 mm
70817-4-095 N/A {0} {QUOTE} N/A M4 x 0.7 N/A 6.35 mm N/A 5.38 mm N/A 9.53 mm N/A 5.23 mm N/A 5.77 mm
70817-5-111 N/A {0} {QUOTE} N/A M5 x 0.8 N/A 7.49 mm N/A 6.32 mm N/A 11.13 mm N/A 6.17 mm N/A 6.81 mm
70817-6-143 N/A {0} {QUOTE} N/A M6 x 1 N/A 9.68 mm N/A 8.20 mm N/A 14.27 mm N/A 8.13 mm N/A 8.89 mm
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1