CONNECT WITH US
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Item # |
Thread Size |
Thickness |
Hole Size in Sheet + .003 - .000 |
C + 0.000 - 0.005 |
F - Min. Thread Depth |
L - Length ± .003 |
Standard Finish |
THREAD_SEL |
Inventory |
|---|---|---|---|---|---|---|---|---|---|
| TSO4-256-090 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-125 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-187 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-250 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-312 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-375 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-437 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-500 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-562 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-625 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-687 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-256-750 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-090 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-125 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-187 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-250 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-312 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-375 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-437 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-500 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-562 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-625 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-687 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-6256-750 | Thread Size N/A 0.086-56 (#2-56) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #2-56 | Inventory N/A {0} |
| TSO4-440-090 | Thread Size N/A 0.112-40 (#4-40) | Thickness N/A 0.025 in | Hole Size in Sheet + .003 - .000 N/A 0.003 | C + 0.000 - 0.005 N/A 0.00 | F - Min. Thread Depth N/A MIN. | L - Length ± .003 N/A 0.003 | Standard Finish N/A Passivated and/or tested per ASTM A380 | THREAD_SEL N/A #4-40 | Inventory N/A {0} |
