S.W. Anderson - PEM Self-Clinching Nuts, Type SMPS - Unified
Products
PEM® Self-Clinching Fasteners Panel & Access Hardware Circuit Board Hardware Standoffs & Spacers Threaded Inserts
for Plastics Installation Tools &
Repair Kits Heli-Coil™ Wire Inserts Rivets & Rivet Nuts Accuride® Precision Slides S.W. Anderson's
Other Product Lines Customer Log In
Search:GO
View CartView RFQ'sExpress Ordering  | Shipping 
 | Tax 
 | Terms 
 Shopping Cart  0 items 
 Request for Quote  0 items 
All Categories > Rivets & Rivet Nuts > Well Nuts/Jack Nuts > Well-Nut® Threaded Inserts > Concealed-Head Studs, Types CHA,CFHA,CHC,CFHC - Metric > Surface Mount Right Angle Fastener - Inch > PEM Self-Clinching Nuts, Type SMPS - Unified > View Items 
    Download PDF Download PDF     Print Printable Page     Email Email This Page     Save To Favorites Save To Favorites

PEM Self-Clinching Nuts, Type SMPS - Unified

 width= 
Check up to five results to perform an action.
 width=


For load-bearing threads in thin sheets - aluminum, steel, and other ductile materials.

Proved Performance
For over 60 years, PEM brand self-clinching fasteners have satisfied production and fastening requirements wherever load- bearing threads are required in thin metal sections too thin to tap.

Quick, convenient assembly using standard tools
Installation of PEM brand self-clinching nuts is simple, quick, and convenient. Just insert them in punched or drilled holes, then apply a squeezing force to embed the clinching ring completely in the sheet metal.

High pushout & torque-out resistance
The clinching ring locks the displaced metal behind the tapered shank, ensuring high pushout resistance. High torque-out resistance is ensured when the knurled platform is embedded in the sheet metal.

Distortion-free installation
Proper installation forces will not distort or damage the threads in PEM nuts because the recommended shank length is always less than the minimum sheet thickness.

Reverse side remains flush
All clinching takes place on the fastener side of the sheet. The reverse side remains flush and smooth.

Self-clinching Locknuts
These locknuts (Type SL™) are designed with a unique and economical TRI-DENT® locking feature, which meets demanding locking performance requirements.

Thin Sheet Self-clinching Nuts
These nuts (Type SMPS™) feature a lower profile and can be mounted closer to the edge of a sheet than standard self-clinching nuts.

Self-clinching nuts for stainless steel
PEM 300® self-clinching nuts (Type SP™) are especially designed for permanent installation into stainless steel sheets as thin as .0307 0.8 mm.

Machined from a specialty stainless steel, these fasteners are then heat-treated to a hardness higher than most 300 Series stainless steels. This feature enables PEM 300 fasteners to be installed into stainless steel sheets, employing the same self-clinching principle which has proved successful over the years in thousands of applications.

Installation, pushout, and torque-out values reported are averages when all installation specifications and procedures are followed. Variations in mounting hole size, sheet material, and installation procedure will affect this data. Performance testing of this product in your application is recommended. We will be happy to provide samples for this purpose.
Type SMPS

larger image 		Type SMPS-dimensions

larger image


Request InformationCompare Items   Results per Page : 
  Results 1 - 3 of 3 1 

MFG #

Inventory

List Price

Thread Size

Hole Size in Sheet +.003 -.000

E ±.010

A - Shank Max.

Min. Sheet Thickness

C Max.

SMPS-256 5081 0.07714 #2-56 .136 in .220 in .024 in .025 in .135 in
SMPS-440 14659 0.07828 #4-40 .166 in .220 in .024 in .250 in .165 in
SMPS-632 12641 0.08527 #6-32 .187 in .252 in .024 in .250 in .186 in
  Results 1 - 3 of 3 1 
Site created by ThomasNet Web Solutions
S.W. Anderson Co. | Service and Solutions Since 1926