CONNECT WITH US

Products

Cut-out recommendations are based on 16 gauge material thickness. If a thinner material is used, adjustments to the cut-outs must be made to ensure a proper fit. Same cut-out details will apply for locking or non-locking slide. The .140 dia. round hole is used for optional #8 fixing screw. For optimum slide performance, it is recommended that the slide centerline be located at the centerline of the drawer side or slightly toward the plane of the drawer pull. Cut-out recommendation is based on 14 gauge material.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

MFG #

Inventory

List Price

D

E

B

Material Thickness

Drawer Cut-Out 14 N/A {0} {QUOTE} N/A .855 in21.70 mm N/A .815 in20.70 mm N/A N/A
Drawer Cut-Out 16 N/A {0} {QUOTE} N/A .855 in21.70 mm N/A .395 in10.00 mm N/A 9.500 in12.500 in15.500 in241.30 mm317.50 mm393.70 mm N/A 0.06 in1.52 mm
Drawer Cut-Out 18 N/A {0} {QUOTE} N/A .865 in22.00 mm N/A .405 in10.30 mm N/A 9.500 in12.500 in15.500 in241.30 mm317.50 mm393.70 mm N/A .048 in1.22 mm
Drawer Cut-Out 20 N/A {0} {QUOTE} N/A .885 in22.50 mm N/A .425 in10.80 mm N/A 9.500 in12.500 in15.500 in241.30 mm317.50 mm393.70 mm N/A .036 in0.91 mm
Drawer Cut-Out 22 N/A {0} {QUOTE} N/A .905 in23.00 mm N/A .435 in11.10 mm N/A 9.500 in12.500 in15.500 in241.30 mm317.50 mm393.70 mm N/A 0.030 in0.76 mm
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1