PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
The thread locking torque performance of Type PL and PLC PEMHEX® self-clinching fasteners is equivalent to applicable NASM25027 specifications. A nylon hexagonal element provides a reusable, non-metallic prevailing torque thread lock. The strong knurled collar receives the installation force and resists torque. The spin resistance of the knurl greatly exceeds the torque that can be exerted by the self-locking feature. As the knurled collar is embedded in the sheet, the undercut cavity beneath the collar is filled with displaced sheet material, thereby captivating the fastener in the sheet.
The color blue for fastener locking elements is a registered trademark. Unified fasteners have a blue nylon locking element and metric fasteners have a black nylon locking element.
The color blue for fastener locking elements is a registered trademark. Unified fasteners have a blue nylon locking element and metric fasteners have a black nylon locking element.
Item # |
Thread Size |
Hole Size in Sheet + 0.08 |
C Max. |
D Max. |
T Max. |
Standard Finish |
Optional Finish |
Inventory |
---|---|---|---|---|---|---|---|---|
PL-M3-ZI | N/A M3 x 0.5 | N/A 6 mm | N/A 5.98 mm | N/A 5.52 mm | N/A 3.56 mm | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
PL-M4-ZI | N/A M4 x 0.7 | N/A 7.5 mm | N/A 7.48 mm | N/A 7.01 mm | N/A 4.20 mm | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
PL-M5-ZI | N/A M5 x 0.8 | N/A 8 mm | N/A 7.98 mm | N/A 7.52 mm | N/A 4.45 mm | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
PL-M3-ZC | N/A M3 x 0.5 | N/A 6 mm | N/A 5.98 mm | N/A 5.52 mm | N/A 3.56 mm | N/A | N/A Zinc Plated 5µm, Yellow | N/A {0} |
PL-M4-ZC | N/A M4 x 0.7 | N/A 7.5 mm | N/A 7.48 mm | N/A 7.01 mm | N/A 4.20 mm | N/A | N/A Zinc Plated 5µm, Yellow | N/A {0} |
PL-M5-ZC | N/A M5 x 0.8 | N/A 8 mm | N/A 7.98 mm | N/A 7.52 mm | N/A 4.45 mm | N/A | N/A Zinc Plated 5µm, Yellow | N/A {0} |
PLC-M3 | N/A M3 x 0.5 | N/A 6 mm | N/A 5.98 mm | N/A 5.52 mm | N/A 3.56 mm | N/A Passivated and/or tested per ASTM A380 | N/A | N/A {0} |
PLC-M4 | N/A M4 x 0.7 | N/A 7.5 mm | N/A 7.48 mm | N/A 7.01 mm | N/A 4.20 mm | N/A Passivated and/or tested per ASTM A380 | N/A | N/A {0} |
PLC-M5 | N/A M5 x 0.8 | N/A 8 mm | N/A 7.98 mm | N/A 7.52 mm | N/A 4.45 mm | N/A Passivated and/or tested per ASTM A380 | N/A | N/A {0} |