PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation.
Provide load-bearing threads in thin sheets with high pushout and torque-out resistance.
Type CLA is recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 50 or less and HB (Hardness Brinell) 82 or less.
Types CLS/CLSS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 70 or less and HB (Hardness Brinell) 125 or less.
Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less.
Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.
Item # |
Thread Size x Pitch |
A (Shank) Max. |
Hole Size in Sheet + 0.08 |
E ± 0.25 |
Fastener Material |
Standard Finish |
Optional Finish |
Inventory |
---|---|---|---|---|---|---|---|---|
S-M6-00ZI | N/A M6 x 1 | N/A 0.89 mm | N/A 8.75 mm | N/A 11.18 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2-0ZI | N/A M2 x 0.4 | N/A 0.77 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2.5-0ZI | N/A M2.5 x 0.45 | N/A 0.77 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3-0ZI | N/A M3 x 0.5 | N/A 0.77 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3.5-0ZI | N/A M3.5 x 0.6 | N/A 0.77 mm | N/A 4.75 mm | N/A 7.11 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M4-0ZI | N/A M4 x 0.7 | N/A 0.77 mm | N/A 5.41 mm | N/A 7.87 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
SS-M5-0ZI | N/A M5 x 0.8 | N/A 0.77 mm | N/A 6.35 mm | N/A 8.64 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M6-0ZI | N/A M6 x 1 | N/A 1.15 mm | N/A 8.75 mm | N/A 11.18 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2-1ZI | N/A M2 x 0.4 | N/A 0.97 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2.5-1ZI | N/A M2.5 x 0.45 | N/A 0.97 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3-1ZI | N/A M3 x 0.5 | N/A 0.97 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3.5-1ZI | N/A M3.5 x 0.6 | N/A 0.97 mm | N/A 4.75 mm | N/A 7.11 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M4-1ZI | N/A M4 x 0.7 | N/A 0.97 mm | N/A 5.41 mm | N/A 7.87 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
SS-M5-1ZI | N/A M5 x 0.8 | N/A 0.97 mm | N/A 6.35 mm | N/A 8.64 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M6-1ZI | N/A M6 x 1 | N/A 1.38 mm | N/A 8.75 mm | N/A 11.18 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M8-1ZI | N/A M8 x 1.25 | N/A 1.38 mm | N/A 10.5 mm | N/A 12.7 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M10-1ZI | N/A M10 x 1.5 | N/A 2.21 mm | N/A 14 mm | N/A 17.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M12-1ZI | N/A M12 x 1.75 | N/A 3.05 mm | N/A 17 mm | N/A 20.57 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2-2ZI | N/A M2 x 0.4 | N/A 1.38 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M2.5-2ZI | N/A M2.5 x 0.45 | N/A 1.38 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3-2ZI | N/A M3 x 0.5 | N/A 1.38 mm | N/A 4.22 mm | N/A 6.35 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M3.5-2ZI | N/A M3.5 x 0.6 | N/A 1.38 mm | N/A 4.75 mm | N/A 7.11 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M4-2ZI | N/A M4 x 0.7 | N/A 1.38 mm | N/A 5.41 mm | N/A 7.87 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
SS-M5-2ZI | N/A M5 x 0.8 | N/A 1.38 mm | N/A 6.35 mm | N/A 8.64 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |
S-M6-2ZI | N/A M6 x 1 | N/A 2.21 mm | N/A 8.75 mm | N/A 11.18 mm | N/A Heat-Treated Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A | N/A {0} |