PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
PEM® KEYHOLE® Standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC can be used for spacing or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement.
Type SKC - Allows detachable spacing of two sheets
Type SKC - Allows detachable spacing of two sheets
- Clinch feature mounts fastener permanently into metal sheet.
- Unique barrel design allows for quick attachment and detachment.
- Head is flush with one side of metal sheet.
- Makes horizontal or vertical component mounting possible.
Item # |
A ± 0.08 |
L - Length ± 0.13 |
M Max. |
S ± 0.08 |
Standard Material |
Standard Finish |
Inventory |
---|---|---|---|---|---|---|---|
SKC-61.5-2 | N/A 2.51 mm | N/A 2 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-4 | N/A 2.51 mm | N/A 4 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-6 | N/A 2.51 mm | N/A 6 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-8 | N/A 2.51 mm | N/A 8 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-10 | N/A 2.51 mm | N/A 10 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-12 | N/A 2.51 mm | N/A 12 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-14 | N/A 2.51 mm | N/A 14 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-16 | N/A 2.51 mm | N/A 16 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-18 | N/A 2.51 mm | N/A 18 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-20 | N/A 2.51 mm | N/A 20 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-22 | N/A 2.51 mm | N/A 22.00 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
SKC-61.5-25 | N/A 2.51 mm | N/A 25 mm | N/A 2.75 mm | N/A 1.72 mm | N/A 300 Series stainless steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |