PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Spiral Pointed - Plug & Spiral Flute.
Used for efficient chip disposal in production tapping operations. Available in sizes thru 12mm.
Spiral Pointed - Plug (4 Thread Chamfer). Incorporates an angular grind at the point end of the tap which shears chips and drives them forward of the tap. Used widely in long thru holes and blind holes with ample chip clearance. They are free cutting and provide increased tap strength. Not recommended for abrasive materials.
Used for efficient chip disposal in production tapping operations. Available in sizes thru 12mm.
Spiral Pointed - Plug (4 Thread Chamfer). Incorporates an angular grind at the point end of the tap which shears chips and drives them forward of the tap. Used widely in long thru holes and blind holes with ample chip clearance. They are free cutting and provide increased tap strength. Not recommended for abrasive materials.
MFG # |
Inventory |
List Price |
Thread Size |
Class of Fit |
Overall Length |
Thread Length |
Max. Shank Diameter |
Size of Square |
---|---|---|---|---|---|---|---|---|
4863-2 | N/A {0} | {QUOTE} | N/A M2 x 0.4 | N/A 4H5H | N/A 46.04 mm | N/A 12.70 mm | N/A 3.58 mm | N/A 2.80 mm |
4863-2.2 | N/A {0} | {QUOTE} | N/A M2.2 x 0.45 | N/A 4H5H | N/A 47.62 mm | N/A 14.29 mm | N/A 3.58 mm | N/A 2.79 mm |
4863-2.5 | N/A {0} | {QUOTE} | N/A M2.5 x 0.45 | N/A 4H5H | N/A 49.21 mm | N/A 15.88 mm | N/A 3.58 mm | N/A 2.79 mm |
4863-3 | N/A {0} | {QUOTE} | N/A M3 x 0.5 | N/A 4H5H | N/A 50.80 mm | N/A 17.46 mm | N/A 3.58 mm | N/A 2.79 mm |
4863-3.5 | N/A {0} | {QUOTE} | N/A M3.5 x 0.6 | N/A 4H5H | N/A 53.98 mm | N/A 19.05 mm | N/A 4.27 mm | N/A 3.33 mm |
4863-4 | N/A {0} | {QUOTE} | N/A M4 x 0.7 | N/A 4H5H | N/A 60.32 mm | N/A 22.22 mm | N/A 4.93 mm | N/A 3.86 mm |
4863-5 | N/A {0} | {QUOTE} | N/A M5 x 0.8 | N/A 4H5H | N/A 63.50 mm | N/A 25.40 mm | N/A 6.48 mm | N/A 4.85 mm |
4863-6 | N/A {0} | {QUOTE} | N/A M6 x 1 | N/A 4H5H | N/A 69.06 mm | N/A 28.58 mm | N/A 8.08 mm | N/A 6.04 mm |
4863-7 | N/A {0} | {QUOTE} | N/A M7 x 1 | N/A 4H5H | N/A 74.61 mm | N/A 31.75 mm | N/A 9.68 mm | N/A 7.26 mm |
4863-8 | N/A {0} | {QUOTE} | N/A M8 x 1.25 | N/A 4H5H | N/A 74.61 mm | N/A 31.75 mm | N/A 9.68 mm | N/A 7.26 mm |
4863-10 | N/A {0} | {QUOTE} | N/A M10 x 1.5 | N/A 4H5H | N/A 85.72 mm | N/A 42.07 mm | N/A 9.32 mm | N/A 6.98 mm |
4863-12 | N/A {0} | {QUOTE} | N/A M12 x 1.75 | N/A 4H5H | N/A 91.28 mm | N/A 42.07 mm | N/A 10.90 mm | N/A 8.18 mm |
4763-2 | N/A {0} | {QUOTE} | N/A M2 x 0.4 | N/A 5H | N/A 46.04 mm | N/A 12.70 mm | N/A 3.58 mm | N/A 2.80 mm |
4763-2.2 | N/A {0} | {QUOTE} | N/A M2.2 x 0.45 | N/A 5H | N/A 47.62 mm | N/A 14.29 mm | N/A 3.58 mm | N/A 2.79 mm |
4763-2.5 | N/A {0} | {QUOTE} | N/A M2.5 x 0.45 | N/A 5H | N/A 49.21 mm | N/A 15.88 mm | N/A 3.58 mm | N/A 2.79 mm |
4763-3 | N/A {0} | {QUOTE} | N/A M3 x 0.5 | N/A 5H | N/A 50.80 mm | N/A 17.46 mm | N/A 3.58 mm | N/A 2.79 mm |
4763-3.5 | N/A {0} | {QUOTE} | N/A M3.5 x 0.6 | N/A 5H | N/A 53.98 mm | N/A 19.05 mm | N/A 4.27 mm | N/A 3.33 mm |
4763-4 | N/A {0} | {QUOTE} | N/A M4 x 0.7 | N/A 5H | N/A 60.32 mm | N/A 22.22 mm | N/A 4.93 mm | N/A 3.86 mm |
4763-5 | N/A {0} | {QUOTE} | N/A M5 x 0.8 | N/A 5H | N/A 63.50 mm | N/A 25.40 mm | N/A 6.48 mm | N/A 4.85 mm |
4763-6 | N/A {0} | {QUOTE} | N/A M6 x 1 | N/A 5H | N/A 69.06 mm | N/A 28.58 mm | N/A 8.08 mm | N/A 6.04 mm |
4763-7 | N/A {0} | {QUOTE} | N/A M7 x 1 | N/A 5H | N/A 74.61 mm | N/A 31.75 mm | N/A 9.68 mm | N/A 7.26 mm |
4763-8 | N/A {0} | {QUOTE} | N/A M8 x 1.25 | N/A 5H | N/A 74.61 mm | N/A 31.75 mm | N/A 9.68 mm | N/A 7.26 mm |
4763-10 | N/A {0} | {QUOTE} | N/A M10 x 1.5 | N/A 5H | N/A 85.72 mm | N/A 42.07 mm | N/A 9.32 mm | N/A 6.98 mm |
4763-12 | N/A {0} | {QUOTE} | N/A M12 x 1.75 | N/A 5H | N/A 91.28 mm | N/A 42.07 mm | N/A 10.90 mm | N/A 8.18 mm |