PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Roughing Tap. Are available for difficult tapping operations where it is desirable to reduce the load on the finishing tap. Avail able in sizes 12mm thru 24mm.
MFG # |
Inventory |
List Price |
Style |
Overall Length |
Thread Length |
Length of Square |
Shank Diameter |
Max. Shank Diameter |
---|---|---|---|---|---|---|---|---|
3767-12 | N/A {0} | {QUOTE} | N/A M12 x 1.25 | N/A 91.28 mm | N/A 42.07 mm | N/A 12.70 mm | N/A 10.90 mm | N/A 8.18 mm |
3768-12 | N/A {0} | {QUOTE} | N/A M12 x 1.5 | N/A 91.28 mm | N/A 42.07 mm | N/A 12.70 mm | N/A 10.90 mm | N/A 8.18 mm |
3768-14 | N/A {0} | {QUOTE} | N/A M14 x 1.5 | N/A 96.84 mm | N/A 46.04 mm | N/A 14.29 mm | N/A 12.19 mm | N/A 9.14 mm |
3768-16 | N/A {0} | {QUOTE} | N/A M16 x 1.5 | N/A 107.95 mm | N/A 50.80 mm | N/A 17.46 mm | N/A 14.99 mm | N/A 11.23 mm |
3768-18 | N/A {0} | {QUOTE} | N/A M18 x 1.5 | N/A 113.51 mm | N/A 50.80 mm | N/A 17.46 mm | N/A 16.56 mm | N/A 12.42 mm |
3768-20 | N/A {0} | {QUOTE} | N/A M20 x 1.5 | N/A 119.06 mm | N/A 56.36 mm | N/A 19.05 mm | N/A 17.70 mm | N/A 13.28 mm |
3768-22 | N/A {0} | {QUOTE} | N/A M22 x 1.5 | N/A 130.18 mm | N/A 63.50 mm | N/A 20.64 mm | N/A 20.32 mm | N/A 15.24 mm |
3769-18 | N/A {0} | {QUOTE} | N/A M18 x 2 | N/A 113.51 mm | N/A 50.80 mm | N/A 17.46 mm | N/A 16.56 mm | N/A 12.42 mm |
3769-20 | N/A {0} | {QUOTE} | N/A M20 x 2 | N/A 124.62 mm | N/A 56.36 mm | N/A 19.05 mm | N/A 19.30 mm | N/A 14.48 mm |
3769-22 | N/A {0} | {QUOTE} | N/A M22 x 2 | N/A 130.18 mm | N/A 63.50 mm | N/A 20.64 mm | N/A 20.32 mm | N/A 15.24 mm |
3769-24 | N/A {0} | {QUOTE} | N/A M24 x 2 | N/A 130.18 mm | N/A 63.50 mm | N/A 22.22 mm | N/A 22.76 mm | N/A 17.07 mm |