PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Heli-Coil inserts are precision formed coils of extremely hard, diamond shaped 304 stainless steel. When installed into an STI tapped hole, they provide permanent conventional 60° internal screw threads. This assembled insert accommodates any standard bolt or screw as per MIL-S-7742 and AS8879 (UNJ controlled root radius).
Heli-Coil inserts are larger in diameter before installation than the tapped hole. During installation the inserting tool applies torque to the tang reducing the diameter of the leading coil permitting it to enter the tapped thread. After installation, each high tensile coil of the insert expands outward with a spring-like action permanently anchoring the insert.
Notes on Insert Specifications:
1. Nominal Length is a computed value and cannot be measured. It is the actual assembled length + 1/2 pitch.
2. The number of coils are counted 90° from the tang.
3. Grip Coil(s| Location for 1,1-1/2 and 2 diameter long inserts, Grip Coil Location = 1/2 the number of free coils. For 2-1/2 and 3 diameter long inserts. Grip Coil Location (distance from the tang) is the same as 2 diameter long inserts.
Heli-Coil inserts are larger in diameter before installation than the tapped hole. During installation the inserting tool applies torque to the tang reducing the diameter of the leading coil permitting it to enter the tapped thread. After installation, each high tensile coil of the insert expands outward with a spring-like action permanently anchoring the insert.
Notes on Insert Specifications:
1. Nominal Length is a computed value and cannot be measured. It is the actual assembled length + 1/2 pitch.
2. The number of coils are counted 90° from the tang.
3. Grip Coil(s| Location for 1,1-1/2 and 2 diameter long inserts, Grip Coil Location = 1/2 the number of free coils. For 2-1/2 and 3 diameter long inserts. Grip Coil Location (distance from the tang) is the same as 2 diameter long inserts.
MFG # |
Inventory |
List Price |
Thread Size |
Thread Size Inch |
Outside Diamater Min. |
Outside Diamater Max. |
Q - Nominal Length |
Number of Coils |
---|---|---|---|---|---|---|---|---|
1185-01CN073 | N/A {0} | {QUOTE} | N/A #1-64 | N/A .073 in | N/A .095 in | N/A .103 in | N/A .073 in | N/A 2-3/4 |
1185-01CN110 | N/A {0} | {QUOTE} | N/A #1-64 | N/A .073 in | N/A .095 in | N/A .103 in | N/A .110 in | N/A 4-7/8 |
1185-01CN146 | N/A {0} | {QUOTE} | N/A #1-64 | N/A .073 in | N/A .095 in | N/A .103 in | N/A .146 in | N/A 6-7/8 |
1185-01CN182 | N/A {0} | {QUOTE} | N/A #1-64 | N/A .073 in | N/A .095 in | N/A .103 in | N/A .182 in | N/A 8-7/8 |
1185-01CN219 | N/A {0} | {QUOTE} | N/A #1-64 | N/A .073 in | N/A .095 in | N/A .103 in | N/A .219 in | N/A 10-7/8 |
1185-02CN086 | N/A {0} | {QUOTE} | N/A #2-56 | N/A .086 in | N/A .110 in | N/A .119 in | N/A .086 in | N/A 3 |
1185-02CN129 | N/A {0} | {QUOTE} | N/A #2-56 | N/A .086 in | N/A .110 in | N/A .119 in | N/A .129 in | N/A 5-1/4 |
1185-02CN172 | N/A {0} | {QUOTE} | N/A #2-56 | N/A .086 in | N/A .110 in | N/A .119 in | N/A .172 in | N/A 7-3/8 |
1185-02CN215 | N/A {0} | {QUOTE} | N/A #2-56 | N/A .086 in | N/A .110 in | N/A .119 in | N/A .215 in | N/A 9-5/8 |
1185-02CN258 | N/A {0} | {QUOTE} | N/A #2-56 | N/A .086 in | N/A .110 in | N/A .119 in | N/A .258 in | N/A 11-7/8 |
1185-03CN099 | N/A {0} | {QUOTE} | N/A #3-48 | N/A .099 in | N/A .128 in | N/A .139 in | N/A .099 in | N/A 2-7/8 |
1185-03CN148 | N/A {0} | {QUOTE} | N/A #3-48 | N/A .099 in | N/A .128 in | N/A .139 in | N/A .148 in | N/A 5 |
1185-03CN198 | N/A {0} | {QUOTE} | N/A #3-48 | N/A .099 in | N/A .128 in | N/A .139 in | N/A .198 in | N/A 7-1/4 |
1185-03CN248 | N/A {0} | {QUOTE} | N/A #3-48 | N/A .099 in | N/A .128 in | N/A .139 in | N/A .248 in | N/A 9-3/8 |
1185-03CN297 | N/A {0} | {QUOTE} | N/A #3-48 | N/A .099 in | N/A .128 in | N/A .139 in | N/A .297 in | N/A 11-1/2 |
1185-04CN112 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .112 in | N/A .144 in | N/A .159 in | N/A .112 in | N/A 2-3/4 |
1185-04CN168 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .112 in | N/A .144 in | N/A .159 in | N/A .168 in | N/A 4-3/4 |
1185-04CN224 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .112 in | N/A .144 in | N/A .159 in | N/A .224 in | N/A 6-3/4 |
1185-04CN280 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .112 in | N/A .144 in | N/A .159 in | N/A .280 in | N/A 8-7/8 |
1185-04CN336 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .112 in | N/A .144 in | N/A .159 in | N/A .336 in | N/A 10-7/8 |
1185-05CN125 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .125 in | N/A .158 in | N/A .173 in | N/A .125 in | N/A 3-1/4 |
1185-05CN188 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .125 in | N/A .158 in | N/A .173 in | N/A .188 in | N/A 5-1/2 |
1185-05CN250 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .125 in | N/A .158 in | N/A .173 in | N/A .250 in | N/A 7-3/4 |
1185-05CN312 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .125 in | N/A .158 in | N/A .173 in | N/A .312 in | N/A 10 |
1185-05CN375 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .125 in | N/A .158 in | N/A .173 in | N/A .375 in | N/A 12-1/4 |