PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
- Enlarged head diameter reduces stress on panel.
- Thicker head allows for larger hole in attached panels.
- Clinch design provides high-strength in sheets as thin as 0.8 mm.
- Recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 85 or less and HB (Hardness Brinell) 165 or less.
Item # |
Thread Size x Pitch |
Hole Size in Sheet + 0.13 |
L - Length ± 0.4 |
H ± 0.25 |
Fastener Material |
Standard Finish |
Inventory |
---|---|---|---|---|---|---|---|
THFE-M6-15-ZI | N/A M6 x 1 | N/A 6 mm | N/A 15 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-15-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 15 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-20-ZI | N/A M6 x 1 | N/A 6 mm | N/A 20 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-20-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 20 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-25-ZI | N/A M6 x 1 | N/A 6 mm | N/A 25 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-25-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 25 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-30-ZI | N/A M6 x 1 | N/A 6 mm | N/A 30 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-30-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 30 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-35-ZI | N/A M6 x 1 | N/A 6 mm | N/A 35 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-35-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 35 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-40-ZI | N/A M6 x 1 | N/A 6 mm | N/A 40 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-40-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 40 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M6-50-ZI | N/A M6 x 1 | N/A 6 mm | N/A 50 mm | N/A 11.35 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |
THFE-M8-50-ZI | N/A M8 x 1.25 | N/A 8 mm | N/A 50 mm | N/A 15.3 mm | N/A Hardened Carbon Steel | N/A Zinc Plated, 5µm, Colorless | N/A {0} |