PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Heli-Coil power tools are avail able in UNC and UNF sizes #2 thru 1/2" for rapid installation of Heli-Coil inserts. Power tools consist of a Front End Assembly, an Adapter and a reversible Air Motor. All three components are ordered separately. A Front End Assembly consists of a prewinder, mandrel and spacers. Select the adapter that corresponds with the insert size being used. Power tools for strip feed inserts are available in sizes #2 through 5/16".
MFG # |
Inventory |
List Price |
Thread Size |
A |
B |
C |
Thread Size Unified |
D |
---|---|---|---|---|---|---|---|---|
8551-04 | N/A {0} | {QUOTE} | N/A #4-40 | N/A 0.25 in | N/A 0.562 in | N/A .719 in | N/A .112 in | N/A 1.125 in |
8551-05 | N/A {0} | {QUOTE} | N/A #5-40 | N/A 0.281 in | N/A 0.562 in | N/A .719 in | N/A .125 in | N/A 1.125 in |
8551-06 | N/A {0} | {QUOTE} | N/A #6-32 | N/A 0.312 in | N/A 0.562 in | N/A .719 in | N/A .138 in | N/A 1.125 in |
8551-2 | N/A {0} | {QUOTE} | N/A #8-32 | N/A 0.344 in | N/A 0.562 in | N/A .719 in | N/A .164 in | N/A 1.125 in |
8551-3 | N/A {0} | {QUOTE} | N/A #10-24 | N/A 0.375 in | N/A 0.906 in | N/A .719 in | N/A .190 in | N/A 1.125 in |
8551-4 | N/A {0} | {QUOTE} | N/A 1/4-20 | N/A .422 in | N/A 0.906 in | N/A .719 in | N/A .250 in | N/A 1.125 in |
8251-5 | N/A {0} | {QUOTE} | N/A 5/16-18 | N/A 0.562 in | N/A 1.125 in | N/A 1.000 in | N/A .312 in | N/A 1.562 in |
8251-6 | N/A {0} | {QUOTE} | N/A 3/8-16 | N/A 0.688 in | N/A 1.344 in | N/A 1.000 in | N/A .375 in | N/A 1.562 in |
8251-7 | N/A {0} | {QUOTE} | N/A 7/16-14 | N/A 0.750 in | N/A 1.531 in | N/A 1.000 in | N/A .438 in | N/A 1.562 in |
8251-8 | N/A {0} | {QUOTE} | N/A 1/2-13 | N/A 0.812 in | N/A 1.781 in | N/A 1.000 in | N/A .500 in | N/A 1.562 in |