PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
PEM® self-clinching, flush-head studs with X-Press™ threads are typically used with push-on or other plastic fasteners. The coarse thread design of the thread reduces assembly time and provides high retention force.
These self-clinching studs are installed in metal sheets by pressing them into place with any standard press. They can also be installed using automated equipment during the in-die process.
PEM® studs with X-Press™ threads are available with 5 mm and 6 mm metric threads. Lengths range from 10 mm to 25 mm.
Features and BenefitsOffers fast, reliable attachment. Reduces assembly time. Allows for lighter assembly. Self-clinching stud mounts flush in metal sheets as thin as 1mm. Thread design accommodates paints and coatings without compromising performance. Self-clinching technology is cleaner and has a more attractive finished appearance than welding. Can be installed during the stamping process with PEMSERTER® in-die technology.
These self-clinching studs are installed in metal sheets by pressing them into place with any standard press. They can also be installed using automated equipment during the in-die process.
PEM® studs with X-Press™ threads are available with 5 mm and 6 mm metric threads. Lengths range from 10 mm to 25 mm.
Features and Benefits
Item # |
Thread Size x Pitch |
Hole Size in Sheet + 0.08 |
L - Length ± 0.4 |
H ± 0.4 |
Thread_TXT |
Material_TXT |
Heat Treat_TXT |
Inventory |
---|---|---|---|---|---|---|---|---|
FH-X5-10ZI | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-10ZI | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-15ZI | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-15ZI | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-20ZI | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-20ZI | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-25ZI | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-25ZI | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-10X | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-10X | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-15X | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-15X | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-20X | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-20X | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X5-25X | N/A 5 mm x 1.6 | N/A 0.08 | N/A 6.5 mm | N/A 4 mm | N/A 5 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |
FH-X6-25X | N/A 6 mm x 1.6 | N/A 0.08 | N/A 8.2 mm | N/A 4 mm | N/A 6 MM x 1.6 | N/A STEEL | N/A YES | N/A {0} |