PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FH4 & FHP (flush-head) Studs for Stainless Steel are designed to provide strong threads in stainless steel sheets as thin as 0.040" . Type FHP studs have high corrosion resistance. Both types are designed for use in stainless steel sheets with a hardness of 92 or less on the Rockwell "B" scale
FH4 & FHP (flush-head) Studs for Stainless Steel are designed to provide strong threads in stainless steel sheets as thin as 0.040" . Type FHP studs have high corrosion resistance. Both types are designed for use in stainless steel sheets with a hardness of 92 or less on the Rockwell "B" scale
- Recommended for use in stainless steel sheets HRB (Rockwell "B" Scale) 92 or less and HB (Hardness Brinell) 195 or less.
- Type FHP offers high corrosion resistance and ideal for medical, foodservice, and marine applications.
Item # |
Thread Size |
Hole Size in Sheet + .003 - .000 |
L - Length ± .015 |
H ± .015 |
S Max. |
Fastener Material |
Standard Finish |
Inventory |
---|---|---|---|---|---|---|---|---|
FH4-440-4 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.25 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-4 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.25 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-4 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.25 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-440-5 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.312 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-5 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.312 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-5 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.312 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-032-5 | N/A 0.190-32 (#10-32) | N/A 0.189 in | N/A 0.312 in | N/A 0.256 in | N/A 0.100 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-440-6 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.375 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-6 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.375 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-6 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.375 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-032-6 | N/A 0.190-32 (#10-32) | N/A 0.189 in | N/A 0.375 in | N/A 0.256 in | N/A 0.100 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-0420-6 | N/A 0.250-20 (1/4-20) | N/A 0.249 in | N/A 0.375 in | N/A 0.337 in | N/A 0.135 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-440-8 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.5 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-8 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.5 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-8 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.5 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-032-8 | N/A 0.190-32 (#10-32) | N/A 0.189 in | N/A 0.5 in | N/A 0.256 in | N/A 0.100 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-0420-8 | N/A 0.250-20 (1/4-20) | N/A 0.249 in | N/A 0.5 in | N/A 0.337 in | N/A 0.135 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-440-10 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.625 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-10 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.625 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-10 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.625 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-032-10 | N/A 0.190-32 (#10-32) | N/A 0.189 in | N/A 0.625 in | N/A 0.256 in | N/A 0.100 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-0420-10 | N/A 0.250-20 (1/4-20) | N/A 0.249 in | N/A 0.625 in | N/A 0.337 in | N/A 0.135 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-440-12 | N/A 0.112-40 (#4-40) | N/A 0.111 in | N/A 0.75 in | N/A 0.176 in | N/A 0.085 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-632-12 | N/A 0.138-32 (#6-32) | N/A 0.137 in | N/A 0.75 in | N/A 0.206 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |
FH4-832-12 | N/A 0.164-32 (#8-32) | N/A 0.163 in | N/A 0.75 in | N/A 0.237 in | N/A 0.09 in | N/A 400 Series Stainless Steel | N/A Passivated and/or tested per ASTM A380 | N/A {0} |