PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
Standard Expansion Inserts are easy to install, two-piece, brass, expandable inserts for use in blind holes in thermo- set or thermoplastic materials. When the captivated spreader plate is depressed, the knurled portion of the insert expands, permanently anchoring the insert in the hole.
If desired, the insert can be installed to protrude above the surface of the part to act as an assembly-locating device.
If desired, the insert can be installed to protrude above the surface of the part to act as an assembly-locating device.
- Versatile - can be used in any type of plastic
- Simple press-in installation
The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
MFG # |
Inventory |
List Price |
Thread Size |
A - Diameter ±.003 |
B - Minimum Threaded Length |
L - Length ±.004 |
C - Diameter ±.001 |
D - Depth |
---|---|---|---|---|---|---|---|---|
70015-04-250 | N/A {0} | {QUOTE} | N/A #4-40 | N/A .156 in | N/A .178 in | N/A .250 in | N/A .158 in | N/A .250 in |
70015-05-313 | N/A {0} | {QUOTE} | N/A #5-40 | N/A .188 in | N/A .240 in | N/A .313 in | N/A .190 in | N/A .313 in |
70015-06-313 | N/A {0} | {QUOTE} | N/A #6-32 | N/A .188 in | N/A .240 in | N/A .313 in | N/A .190 in | N/A .313 in |
70015-06-375 | N/A {0} | {QUOTE} | N/A #6-32 | N/A .188 in | N/A .303 in | N/A .375 in | N/A .190 in | N/A .375 in |
70015-2-313 | N/A {0} | {QUOTE} | N/A #8-32 | N/A .219 in | N/A .240 in | N/A .313 in | N/A .221 in | N/A .313 in |
70015-2-375 | N/A {0} | {QUOTE} | N/A #8-32 | N/A .219 in | N/A .303 in | N/A .375 in | N/A .221 in | N/A .375 in |
70015-3-375 | N/A {0} | {QUOTE} | N/A #10-24 | N/A .250 in | N/A .303 in | N/A .375 in | N/A .252 in | N/A .375 in |
70015-3-438 | N/A {0} | {QUOTE} | N/A #10-24 | N/A .250 in | N/A .365 in | N/A .438 in | N/A .252 in | N/A .438 in |
70011-3-313 | N/A {0} | {QUOTE} | N/A #10-32 | N/A .250 in | N/A .240 in | N/A .313 in | N/A .252 in | N/A .313 in |
70011-3-375 | N/A {0} | {QUOTE} | N/A #10-32 | N/A .250 in | N/A .303 in | N/A .375 in | N/A .252 in | N/A .375 in |
70011-3-438 | N/A {0} | {QUOTE} | N/A #10-32 | N/A .250 in | N/A .365 in | N/A .438 in | N/A .252 in | N/A .438 in |
70015-4-500 | N/A {0} | {QUOTE} | N/A 1/4-20 | N/A .313 in | N/A .428 in | N/A .500 in | N/A .315 in | N/A .500 in |
70015-5-625 | N/A {0} | {QUOTE} | N/A 5/16-18 | N/A .438 in | N/A .537 in | N/A .625 in | N/A .440 in | N/A .625 in |