PROP 65 WARNINGCONNECT WITH US

Products

Clinch inserts feature a pilot and a flange and have the same design characteristics as Standard Expansion Inserts. The inserts are used extensively in the electrical industry. The pilot can be clinched over a terminal connector with the flange providing a large surface for electrical contact. The installation and clinching operations are simultaneous using a simple press-in type tool. Like the Flange Insert, much of the installation force is absorbed by the flange allowing use in thin-section applications.

  • Same superior design characteristics as Standard Expansion Inserts
  • Simple installations

    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The values shown are for Standard Expansion Inserts. These values would also apply to Flange and Clinch Inserts of comparable lengths.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

MFG #

Inventory

List Price

Thread Size

A - Diameter ±0.08

B - Minimum Threaded Length

L - Installed Length ±0.10

C - Clinch Height +0.30 -0.00

D - Flange Diameter ±0.08

70517-3A064 N/A {0} {QUOTE} N/A M3 x 0.5 N/A 3.96 mm N/A 4.52 mm N/A 6.40 mm N/A 1.00 mm N/A 5.56 mm
70517-3.5A080 N/A {0} {QUOTE} N/A M3.5 x 0.6 N/A 4.78 mm N/A 6.10 mm N/A 8.00 mm N/A 1.00 mm N/A 6.35 mm
70517-4A095 N/A {0} {QUOTE} N/A M4 x 0.7 N/A 5.56 mm N/A 7.70 mm N/A 9.50 mm N/A 1.00 mm N/A 7.14 mm
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1