PROP 65 WARNING | CONNECT WITH US |
- PEM® Self-Clinching Fasteners
- ATLAS® Brand Blind Threaded Rivets
- Panel and Access Hardware
- Large Knob, Spring-Loaded
- Low Profile Knob, Spring-loaded
- Screw Head, Spring-loaded
- Screw Head, Spring-loaded, compact
- Screw Head, no Spring
- Tool only, Spring-loaded
- Tool only, Flush Mounted, no Spring
- Tool only, Spinning Clinch Bolt
- For Installing into Stainless
- Locating Pin, Spring-loaded
- Captive Screws, Broaching
- Heat Sink Mounting System
- ReelFast® Surface Mount Spring-Loaded Panel Fastener
- Standoffs and Spacers
- Concealed-Head Standoffs
- Keyhole® Standoffs - Type SKC
- Blind, Threaded Standoffs
- Standoffs, Thru-Hole, Threaded and Unthreaded
- Standoffs for Installing Into Stainless (all)
- Thin Sheet, Thru-Hole Standoffs
- Snap-Top® Standoffs
- Grounding Standoffs
- Close to Edge Standoffs
- Self-clinching microPEM® Standoffs
- Inserts for
Plastics - Installation Tools and Repair Kits
- Heli-Coil™ Wire Inserts
- Rivets
- Precision Ball Bearing Slides
- Fasteners for Mounting into Printed Circuit Boards
- Captive Screws, Broaching - Type PFK
- Captive Screws, Surface Mount
- Captive Screws, other
- Nuts, Broaching
- Nuts and Spacers/Standoffs, Surface Mount
- Standoffs, Broaching
- Standoffs, SNAPTOP® - Type KSSB
- Standoffs, Flare Mount - Type KFB3
- Studs, Broaching - Type KFH
- Right Angle Fastener - Type SMTRA
- ReelFast® microPEM® Surface Mount Nuts / Standoffs
- ReelFast® Surface Mount Spring-Loaded Panel Fastener - Type SMTPFLSM™
- microPEM® TackSert® Inserts
- Weld Nuts
- nuts, bolts & screws
- glides, leveling devices, isolaters & machinery mounts
- assembly hardware standoffs, spacers, & finishing supplies
- knobs, handles & hinges
- bearing seals, gasketing & plastic bearings
- quick access fasteners, latches & spring devices
- lock bolts & rivets
- standard hardware
The Ultraseal Pipe Thread Insert is an innovative design that provides a pressure tight seal over a broad range of operating temperatures.
Ultraseal Pipe Thread Inserts are designed to be installed after molding using either ultrasonics or heat. They pro vide the high performance strength values of molded-in inserts while still retaining all the economical advantages of insert installation after molding.
The O-Ring is the key feature that provides the pressure tight seal. Material: 30% Glass filled nylon 6/6.
It withstands 600°F installation temperature and will function at operating temperatures up to 400°F. When installed into the recommended hole size it will offer a high performance seal between the plastic and the insert.
Assembly Strength Data
Dodge Ultraseal Pipe Thread Inserts provide high tensile and torque loads in addition to their sealing features. The combination of diagonal knurls and undercuts provides a unique anchoring arrangement. Average test values are for reference purposes.
Ultraseal Pipe Thread Inserts are designed to be installed after molding using either ultrasonics or heat. They pro vide the high performance strength values of molded-in inserts while still retaining all the economical advantages of insert installation after molding.
The O-Ring is the key feature that provides the pressure tight seal. Material: 30% Glass filled nylon 6/6.
It withstands 600°F installation temperature and will function at operating temperatures up to 400°F. When installed into the recommended hole size it will offer a high performance seal between the plastic and the insert.
- Provides a pressure tight assembly
- Easy installation and self alignment
- Exceeds rotational and tensile requirements
Assembly Strength Data
Dodge Ultraseal Pipe Thread Inserts provide high tensile and torque loads in addition to their sealing features. The combination of diagonal knurls and undercuts provides a unique anchoring arrangement. Average test values are for reference purposes.
MFG # |
Inventory |
List Price |
Thread Size |
Thread Type |
A - Length |
B - Diameter |
E - Length Min |
C - Diameter |
---|---|---|---|---|---|---|---|---|
6092-2ATBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A ANPT | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-2PTBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A NPT | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-2TFBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A NPTF | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-2SIBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A NPSI | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-2SFBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A NPSF | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-2SCBM400 | N/A {0} | {QUOTE} | N/A 1/8-27 | N/A NPSC | N/A .400 in | N/A .614 in | N/A .430 in | N/A .607 in |
6092-4ATBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A ANPT | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-4PTBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A NPT | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-4TFBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A NPTF | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-4SIBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A NPSI | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-4SFBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A NPSF | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-4SCBM475 | N/A {0} | {QUOTE} | N/A 1/4-18 | N/A NPSC | N/A .475 in | N/A .736 in | N/A .505 in | N/A .727 in |
6092-6ATBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A ANPT | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |
6092-6PTBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A NPT | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |
6092-6TFBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A NPTF | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |
6092-6SIBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A NPSI | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |
6092-6SFBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A NPSF | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |
6092-6SCBM500 | N/A {0} | {QUOTE} | N/A 3/8-18 | N/A NPSC | N/A .500 in | N/A .883 in | N/A .530 in | N/A .870 in |