PROP 65 WARNINGCONNECT WITH US

Products

  • Installed ultrasonically or with heat
  • Two lengths to choose from allowing design flexibility
  • Diagonal knurls & undercuts provide superior assembly strength
  • Excellent design for automated systems
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
Unit of Measure

Discounts

On Hand

N/A {0}

Thread Size

N/A 3/8-24

Type

N/A Short

A - Diameter ±.005

N/A .563 in a1041.jpg

B - Diameter ±.004

N/A .532 in

L - Length ±.004

N/A .375 in

C - Diameter ±.001

N/A .523 in

D - Diameter ±.001

N/A .540 in

Minimum Boss Diameter

N/A 1.126 in

ABS Rotation

N/A 220 lb·in

ABS Tensile

N/A 940 lb

Polycarbonate Rotation

N/A 383 lb·in

Polycarbonate Tensile

N/A 2065 lb

Structural Foam Rotation

N/A 246 lb·in

Structural Foam Tensile

N/A 1356 lb

Nylon 6/6 30% G.F. Rotation

N/A 420 lb·in

Nylon 6/6 30% G.F. Tensile

N/A 2040 lb

N/A Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations.