• Installed ultrasonically or with heat
  • Two lengths to choose from allowing design flexibility
  • Diagonal knurls & undercuts provide superior assembly strength
  • Excellent design for automated systems
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
Unit of Measure


On Hand

N/A {0}

Thread Size

N/A 1/4-28


N/A Long

A - Diameter ±.005

N/A .375 in a1041.jpg

B - Diameter ±.004

N/A .332 in

L - Length ±.004

N/A .500 in

C - Diameter ±.001

N/A .321 in

D - Diameter ±.001

N/A .363 in

Minimum Boss Diameter

N/A .750 in

ABS Rotation

N/A 116 lb·in

ABS Tensile

N/A 1157 lb

Polycarbonate Rotation

N/A 231 lb·in

Polycarbonate Tensile

N/A 2073 lb

Structural Foam Rotation

N/A 131 lb·in

Structural Foam Tensile

N/A 1171 lb

Nylon 6/6 30% G.F. Rotation

N/A 220 lb·in

Nylon 6/6 30% G.F. Tensile

N/A 1884 lb

N/A Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations.