PROP 65 WARNINGCONNECT WITH US

Products

  • Installed ultrasonically or with heat
  • Two lengths to choose from allowing design flexibility
  • Diagonal knurls & undercuts provide superior assembly strength
  • Excellent design for automated systems
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
Unit of Measure

Discounts

On Hand

N/A {0}

Thread Size

N/A 1/4-28

Type

N/A Short

A - Diameter ±.005

N/A .375 in a1041.jpg

B - Diameter ±.004

N/A .354 in

L - Length ±.004

N/A .300 in

C - Diameter ±.001

N/A .349 in

D - Diameter ±.001

N/A .363 in

Minimum Boss Diameter

N/A .750 in

ABS Rotation

N/A 102 lb·in

ABS Tensile

N/A 700 lb

Polycarbonate Rotation

N/A 157 lb·in

Polycarbonate Tensile

N/A 1283 lb

Structural Foam Rotation

N/A 123 lb·in

Structural Foam Tensile

N/A 769 lb

Nylon 6/6 30% G.F. Rotation

N/A 132 lb·in

Nylon 6/6 30% G.F. Tensile

N/A 973 lb

N/A Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations.