• Installed ultrasonically or with heat
  • Two lengths to choose from allowing design flexibility
  • Diagonal knurls & undercuts provide superior assembly strength
  • Excellent design for automated systems
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
Unit of Measure


On Hand

N/A {0}

Thread Size

N/A 3/8-16


N/A Long

A - Diameter ±.005

N/A .563 in a1041.jpg

B - Diameter ±.004

N/A .493 in

L - Length ±.004

N/A .625 in

C - Diameter ±.001

N/A .488 in

D - Diameter ±.001

N/A .540 in

Minimum Boss Diameter

N/A 1.126 in

ABS Rotation

N/A 229 lb·in

ABS Tensile

N/A 1743 lb

Polycarbonate Rotation

N/A 520 lb·in

Polycarbonate Tensile

N/A 3638 lb

Structural Foam Rotation

N/A 297 lb·in

Structural Foam Tensile

N/A 2100 lb

Nylon 6/6 30% G.F. Rotation

N/A 518 lb·in

Nylon 6/6 30% G.F. Tensile

N/A 3303 lb

N/A Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations.