CONNECT WITH US

Products

  • Installed ultrasonically or with heat
  • Two lengths to choose from allowing design flexibility
  • Diagonal knurls & undercuts provide superior assembly strength
  • Excellent design for automated systems
    The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.
Unit of Measure

Discounts

On Hand

N/A {0}

Thread Size

N/A #10-24

Type

N/A Short

A - Diameter ±.005

N/A .297 in a1041.jpg

B - Diameter ±.004

N/A .272 in

L - Length ±.004

N/A .225 in

C - Diameter ±.001

N/A .267 in

D - Diameter ±.001

N/A .278 in

Minimum Boss Diameter

N/A .594 in

ABS Rotation

N/A 51 lb·in

ABS Tensile

N/A 448 lb

Polycarbonate Rotation

N/A 86 lb·in

Polycarbonate Tensile

N/A 773 lb

Structural Foam Rotation

N/A 55 lb·in

Structural Foam Tensile

N/A 505 lb

Nylon 6/6 30% G.F. Rotation

N/A 70 lb·in

Nylon 6/6 30% G.F. Tensile

N/A 565 lb

N/A Dodge Ultraserts can be installed using ultrasonic equipment (moderate to high production) or thermal installation equipment (prototype work and low quantity production). Thermal equipment can be as simple as a soldering iron held by hand or mounted in an arbor or drill press. More refined equipment is available with adjustments and settings for precise uniform installations.