S.W. Anderson - MFG # Cabinet Cut-Out, Cabinet Cut-Out
Products
PEM® Self-Clinching Fasteners Panel & Access Hardware Circuit Board Hardware Standoffs & Spacers Threaded Inserts
for Plastics Installation Tools &
Repair Kits Heli-Coil™ Wire Inserts Rivets & Rivet Nuts Accuride® Precision Slides S.W. Anderson's
Other Product Lines Customer Log In
Search:GO
View CartView RFQ'sExpress Ordering  | Shipping 
 | Tax 
 | Terms 
 Shopping Cart  0 items 
 Request for Quote  0 items 
All Categories > Precision Ball Bearing Slides > Cabinet Cut-Out > MFG # Cabinet Cut-Out  
    Download PDF Download PDF     Print Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

MFG # Cabinet Cut-Out, Cabinet Cut-Out
QUOTE


    Download PDF Download PDF  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Cabinet Cut-Out - Dimensions

larger image
The front and rear hat sections shown here are identical. They are required for all 20 Series slide installations.
The vertical cut-out at the front of the rear hat section accepts the rear cabinet member tab of all 20 Series models.
The vertical cut-out at the back of the front hat section accepts the anti-lift tab on Model 2120.
Set back = Thickness of inset drawer front where applicable + .12" [3.1 mm] clearance.



Inventory · Specifications · Additional Information

Inventory

On Hand

0

Specifications

C

9.500 in
12.50 in
15.500 in
241.30 mm
317.50 mm
393.70 mm
Cabinet Cut-Out - Dimensions

larger image

Additional Information
Slide Installation
  • Place the rear cabinet member tab into rear hat section slot and slide back.
  • Press down on slide until cabinet member tab fully engages front hat section slot. The retention lug above the tab should lock against the top edge of the cut-out.
  • On Model 2120, the anti-lift tab will snap into the rear vertical cut-out.
  • Extend slides.
  • Place the rear drawer tab into the rear drawer member slot and slide back.
  • Lower the front of the drawer until the drawer tab fully engages the slide pocket and snaps into place.

    Slide Removal
  • For Models 3320, 3620, and 3820, remove drawer reversing the installation procedure. Twist cabinet member to disengage anti-lift feature.
  • For Model 2120, remove drawer, then using a finger or screwdriver, depress the cabinet member anti-lift tab inward.
  • Lift slide to remove


    		•

     MORE IMAGES 

    · Cabinet Cut-Out - Detail of Cabinet Member Cut-Outs

    · Cabinet Cut-Out - Slide Installation

    Request Information
    Site created by ThomasNet Web Solutions
    S.W. Anderson Co. | Service and Solutions Since 1926