CONNECT WITH US

Products

  • Ultrasert® I Inserts

    The Ultrasert I insert is a fluted brass insert designed for ultra sonic or heat installation into thermoplastics. The tapered design allows for accurate positioning in the receiving hole ensuring proper alignment prior to installation. The vertical flutes provide resistance to rotation and the stepped inclined ribs are for tensile strength. The gradual external taper optimizes the flow of plastic as the insert/plastic interfaces, permitting a smooth and rapid installation.

    • Vertical flutes and horizontal fins provide superior assembly strength
    • Tapered design assures rapid and accurate alignment prior to installation
    • Flute and fin design provides a chip-free environment
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® I Inserts

    The Ultrasert I insert is a fluted brass insert designed for ultra sonic or heat installation into thermoplastics. The tapered design allows for accurate positioning in the receiving hole ensuring proper alignment prior to installation. The vertical flutes provide resistance to rotation and the stepped inclined ribs are for tensile strength. The gradual external taper optimizes the flow of plastic as the insert/plastic interfaces, permitting a smooth and rapid installation.

    • Vertical flutes and horizontal fins provide superior assembly strength
    • Tapered design assures rapid and accurate alignment prior to installation
    • Flute and fin design provides a chip-free environment
      The test data should be considered as average values for the general families of plastics indicated. Criti cal application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® II Inserts

    • Installed ultrasonically or with heat
    • Two lengths to choose from allowing design flexibility
    • Diagonal knurls & undercuts provide superior assembly strength
    • Excellent design for automated systems
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® II Inserts

    • Installed ultrasonically or with heat
    • Two lengths to choose from allowing design flexibility
    • Diagonal knurls & undercuts provide superior assembly strength
    • Excellent design for automated systems
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® II - Screw-Lock

    The Screw-Lock Ultrasert II is designed for use in vibration applications or where periodic screw adjustment is required. It features a unique internal locking element that is reusable for many cycles. Screw-Locking Ultrasert II inserts can be installed with either ultrasonics or heat.

    • Unique internal locking element
    • Locks screws in place
    • Diagonal knurls and undercuts provide superior assembly strength
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® II - Screw-Lock

    The Screw-Lock Ultrasert II is designed for use in vibration applications or where periodic screw adjustment is required. It features a unique internal locking element that is reusable for many cycles. Screw-Locking Ultrasert II inserts can be installed with either ultrasonics or heat.

    • Unique internal locking element
    • Locks screws in place
    • Diagonal knurls and undercuts provide superior assembly strength
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® III Inserts

    Ultrasert III is a symmetrical insert designed for high volume production. The inserts can be loaded into an automatic feeding system without the need for special orientation. The inserts can be installed ultrasonically, with heat or can also be molded in place. The symmetrical design eliminates the time required for orientation which produces higher production and lower overall cost.

    • Symmetrical design for low cost, high volume production
    • No orientation required
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® III Inserts

    Ultrasert III is a symmetrical insert designed for high volume production. The inserts can be loaded into an automatic feeding system without the need for special orientation. The inserts can be installed ultrasonically, with heat or can also be molded in place. The symmetrical design eliminates the time required for orientation which produces higher production and lower overall cost.

    • Symmetrical design for low cost, high volume production
    • No orientation required
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® IV Inserts

    Ultrasert IV inserts are designed to be installed into straight holes. A lead-in pilot at the front end of the insert accurately positions the insert prior to installation. It is designed with opposing diagonal knurls that provide excellent torque resistance and undercuts for tensile strength. Ultrasert IV inserts are designed for ultrasonic or heat installation into thermoplastics or structural foam materials.

    • Provides high tensile and rotational strength
    • Two lengths to choose from allowing design flexibility
    • Installed ultrasonically or with heat
    • Lead-in pilot positions insert for installation
    • Parallel sides for installation into straight holes
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® IV Inserts

    Ultrasert IV inserts are designed to be installed into straight holes. A lead-in pilot at the front end of the insert accurately positions the insert prior to installation. It is designed with opposing diagonal knurls that provide excellent torque resistance and undercuts for tensile strength. Ultrasert IV inserts are designed for ultrasonic or heat installation into thermoplastics or structural foam materials.

    • Provides high tensile and rotational strength
    • Two lengths to choose from allowing design flexibility
    • Installed ultrasonically or with heat
    • Lead-in pilot positions insert for installation
    • Parallel sides for installation into straight holes
      The test data should be considered as average values for the general families of plastics indicated. Critical application requirements may necessitate further specific testing. The plastic material failed in all cases except where noted.

  • Ultrasert® IV Flanged Inserts

    The Flanged Ultrasert IV insert has the same characteristics as the standard Ultrasert IV with the added benefit of a flange. The flange provides a large bearing surface which is advantageous in weaker plastics. For high strength assemblies they can be used in a reverse screw entry.

    • Provides high tensile and rotational strength
    • Installed ultrasonically or with heat
    • Flange provides a large bearing surface
    • Ideal for an electrical contact: fastening terminal connectors

  • Ultrasert® IV Flanged Inserts

    The Flanged Ultrasert IV insert has the same characteristics as the standard Ultrasert IV with the added benefit of a flange. The flange provides a large bearing surface which is advantageous in weaker plastics. For high strength assemblies they can be used in a reverse screw entry.

    • Provides high tensile and rotational strength
    • Installed ultrasonically or with heat
    • Flange provides a large bearing surface
    • Ideal for an electrical contact: fastening terminal connectors